When searching for a used car, many people look at the mileage and think that low mileage means a better purchase. After all, the less a car has been driven, the less wear and tear, right?
This can be the case, but more important questions to ask are how and where the car was driven.
There are many advantages to a newer, higher mileage car including:
Less wear and tear on components
- Suspension components: Highways tend to have less potholes, dips and bumps, compared to city roads.
- Brake components: You’re typically not required to use the brakes as often on the highway as city driving (e.g. stop-and-go traffic).
Less load on the engine
- The engine works hardest when you want to move from a stopped position. Once in motion, the engine works less to keep the vehicle going.
Less contamination of emission controls
- Such as oxygen sensor(s) and catalytic converter.
A natural by-product of your engine’s combustion is water. This water will mix with the oil in the engine, which will break down the lubrication qualities and create damaging acids. Vehicles that are used for longer driving periods have the advantage of maintaining the operating temperature long enough to boil and remove this moisture from the engine and exhaust system.
When you’re shopping for a used vehicle, consider its mileage versus its production year. If it’s an older car with very little mileage on it, chances are it was used primarily for shorter trips. If it’s a newer car with lots of mileage, it’s likely that the vehicle was mostly driven on the highway. Keep in mind that the average person drives about 20,000 kms per year.
Of course, you’ll also want to see that the vehicle was maintained and regularly serviced. Prior to purchasing, it’s always worthwhile to bring it in for a general inspection. Although it’s not a crystal ball and we can’t tell how worn the engine or transmission is, we can provide a sense of the vehicle’s overall condition and report any foreseeable repairs in the near future. It’s important to keep in mind that just because a vehicle is sold ‘certified,’ that simply means the vehicle passes the minimum standards of safety. It’s not indicative of the amount of repairs that may currently be needed.
Image via freedigitalphotos
*This post was previously published on the Yummy Mummy Club website.*